Endurance socket guide cups

Post by **Tim400GB** » Sun Mar 20, 2016 3:24 pm

Hi all

I'm trying to develop an endurance type front wheel spindle along with some socket guide cups for the VFR (and hopefully the RVF at the same time).

What I could do with some help is the outside diameter of the different manufactures of sockets.
If you could measure your sockets and add them to the list will hopefully allow me to make it available for most people's tooling. Brownie points for a picture of the vernier around the socket

So far I have

Front socket size (24mm hex)
Outside diameter

Halfords professional 31.6mm

Rear socket size (36mm hex)
Outside diameter

Elora 48.88mm

mruehl34 · Post by **mruehl34** » Sun Mar 20, 2016 3:28 pm

? I don't know what you mean.

Michael

Post by **Tim400GB** » Sun Mar 20, 2016 3:42 pm

TLDR Translation

Measure the outside diameter of your 24mm and 36mm sockets and let me know what you get.

Post by **micpec** » Sun Mar 20, 2016 8:27 pm

i can measure couple of teng tools sockets tommorrow for your list.
do you mean like this sort of idea of endurance front wheel spindle?

Post by **Tim400GB** » Sun Mar 20, 2016 8:58 pm

Yes that's the one

Post by **royster81** » Sun Mar 20, 2016 10:16 pm

Daytona seem then, I've seen them for sale on yahoo

Post by **marcus57** » Mon Mar 21, 2016 12:59 pm

I've got some pictures of a 30 with axle cups somewhere , would those be of any use to you ?

Endurance socket guide cups

Endurance socket guide cups

Re: Endurance socket guide cups

Re: Endurance socket guide cups

Re: Endurance socket guide cups

Re: Endurance socket guide cups

Re: Endurance socket guide cups

Re: Endurance socket guide cups