NC30 linkage question.

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
User avatar
monkeywithaplan
Site Supporter
Site Supporter
Posts: 236
Joined: Wed Apr 30, 2008 4:45 pm
Bike owned: NC35 and NC30
Location: Belfast. Northern Ireland
NC30 linkage question.

Post by monkeywithaplan »

Quick question on the linkage (by my meaning of linkage, i mean the U shaped bit and not the triangular bit)

What metal is it? i ask in regarding to welding up the holes in it.

thanks
david
Insisting on perfect safety is for people who don't have the balls to live in the real world. Mary Shafer, NASA Ames Dryden

Bikes don't leak oil, they mark their territory.
Top
User avatar
Jon
Site Supporter
Site Supporter
Posts: 165
Joined: Tue May 20, 2008 2:00 am
Location: Brisbane
Re: NC30 linkage question.

Post by Jon »

Guess you are talking about the fabricated bit that has bearings on one end and hooked to cahssis and two plates going back with drilled holes in them that fits onto the trinagle bit, dogbone seems to be the commonly used name.
If so it is steel, so pretty easy to weld.

regards
jon
Honda NC30
Ducati 900 S2 (under constrcution)
Moto Guzzi Le Mans III
Honda CB550F2
BMW R90S
Top
User avatar
royster81
NWAA Supporter
NWAA Supporter
Posts: 2509
Joined: Wed Apr 30, 2008 8:04 pm
Bike owned: VFR400R-L NC30 CBR400RR-R NC29
Location: Belfast,Northern Ireland
Re: NC30 linkage question.

Post by royster81 »

yes dave it's steel,sorry i couldn't reply earlier i was working
It's not having what you want but wanting what you've got....Loud ,Proud and Modified ....
Top
Post Reply

Return to “Honda - General”