Which GSXR flywheel?

krisztian_andre · Post by **krisztian_andre** » Fri Mar 11, 2016 11:42 pm

Contemplating modding my nc30, which flywheel and stator can I use?

Also interested in buying the parts needed.

Post by **fourfingers** » Sat Mar 12, 2016 10:53 am

Contact Rick Oliver, the flywheel is flipped, so you will need the alternator cover he makes to hold the stator.

Post by **CMSMJ1** » Sat Mar 12, 2016 3:23 pm

k5 is what I have in mine

Post by **Neosophist** » Sun Mar 13, 2016 2:25 am

CMSMJ1 wrote:k5 is what I have in mine

I think thats what I had in my 24 too.

if you have some machining equipment the generator cover isnt hard to fab, there are picture of the general design floating aroudn and with some measurements you can built your own if you like.

If you dont have the gear then Rick O sells pre-made ones that for the money will beat anything you can pay to have made and have been tested by many people now

krisztian_andre · Post by **krisztian_andre** » Sun Mar 13, 2016 8:06 am

Would K7 or K4 fit? Only the 1000 part fits or the 600 etc also?

Post by **Neosophist** » Sun Mar 13, 2016 11:39 am

krisztian_andre wrote:Would K7 or K4 fit? Only the 1000 part fits or the 600 etc also?

you need to search the susuzki website to see if the par tnumbers are the same

if not then you need to find the size of the generator and cmopare it to the original / proven fitting one.

krisztian_andre · Post by **krisztian_andre** » Sun Mar 13, 2016 1:43 pm

Look what I've found:

https://issuu.com/benjaminlindley/docs/ ... alistfinal

Which GSXR flywheel?

Which GSXR flywheel?

Re: Which GSXR flywheel?

Re: Which GSXR flywheel?

Re: Which GSXR flywheel?

Re: Which GSXR flywheel?

Re: Which GSXR flywheel?

Re: Which GSXR flywheel?