Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
kaliforniakid
- Settled in member
- Posts: 5
- Joined: Wed Feb 10, 2016 3:13 am
Post
by kaliforniakid » Wed Feb 10, 2016 8:01 am
Hello everyone,
Im in the states and as you guys across the pond know more about 400's than anyone else. I purchased an adaptor from japan so I can run an RS250 NX5 17" x 5.5 rear rim ( I do know that the rotation will be in the opposite direction ) for my NC30, can anyone tell me if you have been down this road where/how to install the adaptor? a picture of it is in the link below. I have no idea where the "plate" goes and what the bolts maybe for, If anyone can help, I would appreciate it!
http://page22.auctions.yahoo.co.jp/jp/a ... enlargeimg
-
Drunkn Munky
- Site Supporter
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Post
by Drunkn Munky » Wed Feb 10, 2016 11:14 am
AFAIK RS wheel offset is the same as the NC so they bolt straight on bar using the conical outer spacer.
Im guessing that large spacer is to space the wheel out to clear the chain which is fine but you will be running the wheels out of alignment.
For what its worth i know a RS 5.25" wheel fits a NC no problem even with a 165 wet tyre theres no chain issues
-
royster81
- NWAA Supporter
- Posts: 2509
- Joined: Wed Apr 30, 2008 8:04 pm
- Bike owned: VFR400R-L NC30 CBR400RR-R NC29
- Location: Belfast,Northern Ireland
Post
by royster81 » Sat Feb 13, 2016 7:16 am
I'd say those 4 bolts are new flush rear disc bolts . the old standard disc bolts sit in a recess in the wheel, the RS wheels don't have this recess
It's not having what you want but wanting what you've got....Loud ,Proud and Modified ....
-
kaliforniakid
- Settled in member
- Posts: 5
- Joined: Wed Feb 10, 2016 3:13 am
Post
by kaliforniakid » Sat Feb 13, 2016 8:09 am
royster,
would you say the adaptor goes between the hub and the disc?
-
royster81
- NWAA Supporter
- Posts: 2509
- Joined: Wed Apr 30, 2008 8:04 pm
- Bike owned: VFR400R-L NC30 CBR400RR-R NC29
- Location: Belfast,Northern Ireland
Post
by royster81 » Sat Feb 13, 2016 2:30 pm
Hub and wheel
It's not having what you want but wanting what you've got....Loud ,Proud and Modified ....
-
Drunkn Munky
- Site Supporter
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Post
by Drunkn Munky » Sun Feb 14, 2016 7:12 am
Have you tried fitting the wheel without the spacer?
-
reverse cylinder jim
- Site Supporter
- Posts: 421
- Joined: Sun Feb 28, 2010 5:22 pm
Post
by reverse cylinder jim » Sun Feb 14, 2016 7:44 am
Going to second what everyone else is saying. The bolts replace the original disc bolts and the spacer fits between the hub and wheel. You will have to fit the bolts but try it without the spacer first. I'm running rs Dymags without any kind of spacer and have no clearance issues.
-
marcus57
- Site Supporter
- Posts: 1142
- Joined: Sun Jul 04, 2010 1:21 pm
- Bike owned: nc30, nc35, gsxr750
- Location: Taunton
Post
by marcus57 » Sun Feb 14, 2016 11:09 am
I've got a pair of rs pvms , the rear fits fine but you need flush disc bolts
-
Yakama
- Site Supporter
- Posts: 1369
- Joined: Wed Apr 30, 2008 5:27 pm
- Bike owned: NC23s, 29, 30s, MC16
- Location: Oban
Post
by Yakama » Sun Feb 14, 2016 11:36 am
Marcus any idea where to get the flush bolts?
-
marcus57
- Site Supporter
- Posts: 1142
- Joined: Sun Jul 04, 2010 1:21 pm
- Bike owned: nc30, nc35, gsxr750
- Location: Taunton
Post
by marcus57 » Sun Feb 14, 2016 12:28 pm
Yakama wrote:Marcus any idea where to get the flush bolts?
No I still havnt really looked , I tried it on the std axle without a rear disc and with the hrc rep axle it fits fine , I'm sure timon said in here that he had some std bolt heads machined down to get on to fit
