NC30 HT leads/caps
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
DougBee
- Settled in member
- Posts: 12
- Joined: Fri Jul 03, 2015 9:49 pm
- Location: York
NC30 HT leads/caps
Stripping and sorting my NC I've found the plug leads are rock hard and cracking on a couple of the bends so decided it'll be worth replacing them while I've got the bike stripped down. Now I know the caps and leads are 1 item (and not avail from Honda) has anyone replaced these before and know a cap that will fit and still seal up into the rocker cover? At the moment all I can think of are NGK caps with the original ones somehow cut and chopped then put on top..
Cheers.
Cheers.
-
Dynamohum
- Site Supporter
- Posts: 780
- Joined: Sun May 04, 2008 9:07 am
- Location: glasgow
Re: NC30 HT leads/caps
Try rick Oliver I believe he sells replacement leads and caps.
-
DougBee
- Settled in member
- Posts: 12
- Joined: Fri Jul 03, 2015 9:49 pm
- Location: York
Re: NC30 HT leads/caps
Thanks for the reply, hadn't seen them on Ricks price list. In the end I figured the caps were still all fine and probably the best fit on the plugs/rocker cover so I stripped them, unsoldered the HT on each and replaced it. Had to clean up the resistor in each one as they'd a bit of corrosion on the ends so rebuilt them with a bit of terminal grease.. hopefully good to go now.