Fork Seal Spring Clip

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
Magna86
Settled in member
Posts: 2
Joined: Tue Feb 11, 2014 11:27 am
Fork Seal Spring Clip

Post by Magna86 »

Does anyone a Honda part number or a link to where I can find fork seal spring clips for an NC24? I'm redoing for seals and the clips are basically crap.
Top
dgunthor
Settled in member
Posts: 167
Joined: Wed Jan 21, 2009 4:48 pm
Re: Fork Seal Spring Clip

Post by dgunthor »

Don't see a spring in the set here but doesn't mean it's not there:
https://www.davidsilverspares.co.uk/VFR ... JAPANESE)/
Top
Neosophist
Moderators
Moderators
Posts: 8172
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954
Re: Fork Seal Spring Clip

Post by Neosophist »

should be part number 51447ka3004

but its discontiniued long time ago.

some generic off the shelf snap ring for the apprpriate size fork tubes should be avaiable though from soemwhere
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
Top
Morespeedvicar
Site Supporter
Site Supporter
Posts: 837
Joined: Thu May 01, 2008 1:37 am
Bike owned: Fzr400, NC30, CB50J, SS50Z KLR
Location: Grimsby
Re: Fork Seal Spring Clip

Post by Morespeedvicar »

Ive made them from pushbike spokes in the past, or even stainless welding rods
Top
Magna86
Settled in member
Posts: 2
Joined: Tue Feb 11, 2014 11:27 am
Re: Fork Seal Spring Clip

Post by Magna86 »

I found the spring clips from a newer VFR worked just fine and are still available at Honda. ;-) Now to fill the forks and take her for a ride.
Top
Post Reply

Return to “Honda - Workshop”