Removable baffle wanted for a Yamamoto can.

Post by **Speedy** » Thu Sep 03, 2015 10:39 am

Want to get one of those removable baffles for my Yamamoto can, but I'm unsure where to get one and what size it should be.
Anyone has one of them or knows where I can buy one?

Post by **Drunkn Munky** » Thu Sep 03, 2015 11:40 am

Ebay mate theres a seller on there that makes em any size you need

Post by **Neosophist** » Thu Sep 03, 2015 3:37 pm

Speedy wrote:Want to get one of those removable baffles for my Yamamoto can, but I'm unsure where to get one and what size it should be.
Anyone has one of them or knows where I can buy one?

Measure the can and the opening.. as above any generic baffle will fit, they come in all shapes and sizes and don't cost a lot.

your can might have a hole near the spout for a screw to go into the baffle to hold it in place...

pass all these measurements onto an exhaust specialst and they will be able to supply the part

Post by **Speedy** » Sat Sep 05, 2015 9:33 am

The spout does have a hole, presumably for that exact purpose and the spout diameter is 45mm; there are some on ebay of this size, but they're straight and I'm thinking it should be slightly bent (or can I bent it myself?), plus they come from the Peoples Republic and I'd rather deal with a UK seller for a faster service.
@ DM, do you know the guy's ebay name?

Removable baffle wanted for a Yamamoto can.

Removable baffle wanted for a Yamamoto can.

Re: Removable baffle wanted for a Yamamoto can.

Re: Removable baffle wanted for a Yamamoto can.

Re: Removable baffle wanted for a Yamamoto can.