Dyno results
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Noodles
- Settled in member
- Posts: 31
- Joined: Wed Jul 11, 2012 8:47 pm
- Bike owned: GSXR1000K3 NSR125 CBR400NC29
- Location: Nr Hull
Dyno results
Had my Nc29 type 8 on the dyno at the weekend, it made 56 bhp and 24 ft-lbs torque, will post up the chart when i get it scanned off. Do these figures sound about right for a standard bike?
I have a nassert beet titanium system that i am going to put on in the next few weeks, so hoping for a small increase in power.
I have a nassert beet titanium system that i am going to put on in the next few weeks, so hoping for a small increase in power.
-
dunkenb
- Regular Member
- Posts: 560
- Joined: Wed Jun 03, 2009 9:39 pm
- Bike owned: Cbr400rr nc29 type8 NSR250
- Location: West Midlands
Re: Dyno results
How standard is she? Does she still have the webbs in the inlet rubbers? I had a type seven that had a K&N filer and a carbon end can that made 64bhp. 
-
Noodles
- Settled in member
- Posts: 31
- Joined: Wed Jul 11, 2012 8:47 pm
- Bike owned: GSXR1000K3 NSR125 CBR400NC29
- Location: Nr Hull
Re: Dyno results
[img
][/img]Totally standard apart from having inlet rubber webbs removed.
][/img]Totally standard apart from having inlet rubber webbs removed.