How many NC30 bikes ever made?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
trademe900
Settled in member
Posts: 155
Joined: Sat Dec 20, 2008 6:20 am
Bike owned: Everything 90's
Location: Hamamatsu
Re: How many NC30 bikes ever made?

Post by trademe900 »

tanto wrote:FWIW, this week I came across an NC30 frame, number "NC30-1006660". :twisted:
Pretty high number 1989 model. Highest i've seen. There weren't that many made in 1989 I heard.
User avatar
micpec
Site Supporter
Site Supporter
Posts: 1298
Joined: Sat May 03, 2008 9:11 pm
Bike owned: NC35’s, NC30 sold, MC34 many
Location: The Netherlands
Re: How many NC30 bikes ever made?

Post by micpec »

Probably an idea here, just to note only your frame no. last 4 or 5 digits then? And them compare it.
In between my NC35's it only differs 189 NC35 frames(bikes) from eachother, which is pretty close.
"Action without Philosophy is a lethal weapon; Philosophy without action is worthless"
trademe900
Settled in member
Posts: 155
Joined: Sat Dec 20, 2008 6:20 am
Bike owned: Everything 90's
Location: Hamamatsu
Re: How many NC30 bikes ever made?

Post by trademe900 »

micpec wrote:Probably an idea here, just to note only your frame no. last 4 or 5 digits then? And them compare it.
In between my NC35's it only differs 189 NC35 frames(bikes) from eachother, which is pretty close.
May you please reword that? I can't understand what you wrote at all.
SmallFrowne
Settled in member
Posts: 39
Joined: Thu May 03, 2012 4:30 pm
Re: How many NC30 bikes ever made?

Post by SmallFrowne »

Hmm I've stripped my nc30 down recently so it's in bits all over the garage. Whilst crouching to pump my cg125's tyres i looked at the frame number on the nc, never payed attention to it before, but it would appear to be one of the first 200 made. [LOUD BLENDER NOISE... ]... and then he offered £200k for it. Which was nice.
User avatar
JZH
Site Supporter
Site Supporter
Posts: 249
Joined: Mon Oct 27, 2008 7:02 pm
Bike owned: RSCBRRVFVFRST
Location: London, UK/So.Cal., USA
Contact:
Re: How many NC30 bikes ever made?

Post by JZH »

The NC30 Parts Catalogue actually gives the beginning and ending frame numbers--but only for the K and L models. Honda published several editions of the NC30 parts book, but the latest version I have seen is v.6:

Image

According to this, there were approximately 4,269 J-spec NC30s manufactured in 1989 and approximately 9,240 J-spec NC30s manufactured in 1990. There were also NC30s manufactured for other markets, which may (or may not) be included in these figures. Only Honda Japan knows the answer to that...

(The "2J" "3J" and "4J" area codes apparently refer to certain prefectures within Japan, which had slightly different requirements for the sale of new motorcycles, such as relating to the speed limiter/warning light used at the time.)

Ciao,
JZH

London, UK/So.Cal., USA
www.vsource.org
veefa
Settled in member
Posts: 31
Joined: Fri Sep 13, 2013 9:00 am
Bike owned: nc30
Location: north coast australia
Re: How many NC30 bikes ever made?

Post by veefa »

As far as I know the last six numbers on the VIN are Sequential production numbers, and they also refer to the production location within japan as they were not all made in the one factory..
arsey30
Senior Member
Posts: 1218
Joined: Tue Apr 29, 2008 9:13 pm
Bike owned: ftr223 650 bros
Location: Surrey
Re: How many NC30 bikes ever made?

Post by arsey30 »

According to European parts list.

UK 1990 RL VIN 6 -580
Austria 1990 RL 9-579

UK 1991 7- 367
Germany 416 -1163
France 420- 1247

It seems that apart from 1991 UK bikes straight run that they were produced in batches with sequential vin numbers for 2 markets. That makes it impossible to determine how many UK 1990 bikes were made.
E.G. 575 1990 RLs within numbering range 6 -580 for UK and France.

These are not included in the chart shown for jdm as European vin numbers start 2000 not 1000 which is JDM
So, 575 1990, 1241 1991 plus the JDM shown in the previous chart.
Loudandproud205
Settled in member
Posts: 16
Joined: Mon Aug 11, 2014 2:20 pm
Bike owned: VFR400R3 NC30 NSR125R JC20
Location: Market Rasen
Re: How many NC30 bikes ever made?

Post by Loudandproud205 »

I had one of the first 20 MR2 Turbo's built me and the guy I bought it from had no idea, I bought it cheap as it was an old one then stripped its guts and raced it, few dints and a couple of broken clutches later I sold it for £500. Its the first one of that spec and Toyota agreed the value to insurers at £10K since it was recommissioned. Chassis no was SW20 0000012 GT Turbo coupe, climate control and T bars suede seats and deep pile carpets that I threw away as it was extra weight all in the dark red that was only used for the first 6 months of production. Lesson learnt in paying attention to what it might be.....

And it turns out my VFR is a late 92 by the looks of it with its 110 start and late 6287 finish.
veefa
Settled in member
Posts: 31
Joined: Fri Sep 13, 2013 9:00 am
Bike owned: nc30
Location: north coast australia
Re: How many NC30 bikes ever made?

Post by veefa »

my vin ends with number 0388 engine number 388,

mmmmm......

theres more to this than meets the eye......
Kenthammer
NWAA Supporter
NWAA Supporter
Posts: 67
Joined: Sun Apr 12, 2015 9:30 am
Bike owned: 92 NC30 & 94 CBR900RRR
Location: Kent
Re: How many NC30 bikes ever made?

Post by Kenthammer »

My 92 type 7 has a VIN and engine number at over 10000, and as the fairings are all original, the pimple stamps all show 92 and 9,

So thats either week 9 or month 9, I have no idea.

So over 10000 Jap models produced that year

Post Reply