Yamamoto Twinstack system help
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
DaZteK
- Settled in member
- Posts: 5
- Joined: Sun Aug 10, 2014 12:31 am
- Bike owned: 2 VFR 400 NC30's
- Location: Exeter
Yamamoto Twinstack system help
Hey all. I recently got a twinstack yamamoto system for my NC30. Front side seems to fit fine but the rear is a right pain in the arse. Very close clearance issues and such. Anyone got any advice on how to get the bastard to fit correctly?
-
vfrman
- Senior Member
- Posts: 1390
- Joined: Sat Apr 05, 2008 7:54 pm
- Bike owned: NC30, 1098s
- Location: Layton, Utah, USA
Re: Yamamoto Twinstack system help
Patience?
-
royster81
- NWAA Supporter
- Posts: 2509
- Joined: Wed Apr 30, 2008 8:04 pm
- Bike owned: VFR400R-L NC30 CBR400RR-R NC29
- Location: Belfast,Northern Ireland
Re: Yamamoto Twinstack system help
Loosen everything off and start at the back( end cans) and work towards the motor tightening as you go. It just takes time.
It's not having what you want but wanting what you've got....Loud ,Proud and Modified ....
-
DaZteK
- Settled in member
- Posts: 5
- Joined: Sun Aug 10, 2014 12:31 am
- Bike owned: 2 VFR 400 NC30's
- Location: Exeter
Re: Yamamoto Twinstack system help
The main issue i was having was attatching the exhaust to the rear manifold. getting all the studs lined up right and pushing it on enough to be able to tighten everything evenly.