Hey guys,
After years of off and on, the spring washers tang that bend over the screws that hold the airbox tray to the carbs (NC35) have broken and there seems to be no replacements... What have you used in their place? The part is 15 on this link:
http://www.cmsnl.com/rvf400rt-nc35-japa ... VgEwlVVhBc
Thanks!
Busted tangs off carb washer
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Posts: 65
- Joined: Tue Jul 12, 2011 4:20 am
- Location: Alamosa, CO.
-
- Site Supporter
- Posts: 222
- Joined: Tue Apr 08, 2008 5:01 pm
- Bike owned: NC35, 5SL, 3XV, 2MA
- Location: Sharpthorne
Re: Busted tangs off carb washer
Loctite?
- speedy231278
- NWAA Supporter
- Posts: 1549
- Joined: Tue Jul 03, 2012 11:58 am
- Bike owned: RVF400, TZR125, ZXR750R
Re: Busted tangs off carb washer
David Silver seem to think they should still be able to get them.....
http://www.davidsilverspares.co.uk/part ... 090MR8900/
http://www.davidsilverspares.co.uk/part ... 090MR8900/

- DAC
- Site Supporter
- Posts: 104
- Joined: Thu May 01, 2008 8:07 am
- Bike owned: 89 NC30
- Location: Netherthong
Re: Busted tangs off carb washer
Tornado wrote:Hey guys,
After years of off and on, the spring washers tang that bend over the screws that hold the airbox tray to the carbs (NC35) have broken and there seems to be no replacements... What have you used in their place? The part is 15 on this link:
http://www.cmsnl.com/rvf400rt-nc35-japa ... VgEwlVVhBc
Thanks!
I'm pretty sure I must have a spare set for an NC30. Any use to you if I find them tomorrow?
Regards,
Dave.
RWB NC30
- DAC
- Site Supporter
- Posts: 104
- Joined: Thu May 01, 2008 8:07 am
- Bike owned: 89 NC30
- Location: Netherthong
Re: Busted tangs off carb washer
Yep, found them
Let me have your address and I'll stick them in the post for you.
Regards,
Dave.

Let me have your address and I'll stick them in the post for you.
Regards,
Dave.
RWB NC30
-
- Settled in member
- Posts: 65
- Joined: Tue Jul 12, 2011 4:20 am
- Location: Alamosa, CO.
Re: Busted tangs off carb washer
Hey guys,
It's been a while since I checked in, and didn't expect to see any replies. I've currently loc-tited (blue) the screws down, but would prefer the washers withe the tangs for added safety. Dave I will drop you a PM... I really appreciate the offer!
It's been a while since I checked in, and didn't expect to see any replies. I've currently loc-tited (blue) the screws down, but would prefer the washers withe the tangs for added safety. Dave I will drop you a PM... I really appreciate the offer!