NC30 slip-on
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
pouchy750
- Settled in member
- Posts: 9
- Joined: Sun Dec 21, 2014 3:01 am
NC30 slip-on
I've just purchased a 1990 NC30 with a stock exhaust system.
I would like to replace the stock silencer, but it is complete with the exhaust pipes.
I'm apprehensive to cut this off if I can't find a suitable slip-on that will fit the cut exhaust pipe.
I assume slip-ons for this model will come with the appropriate link pipe.
Can anybody recommend one that they have successfully installed?
Thanks
I would like to replace the stock silencer, but it is complete with the exhaust pipes.
I'm apprehensive to cut this off if I can't find a suitable slip-on that will fit the cut exhaust pipe.
I assume slip-ons for this model will come with the appropriate link pipe.
Can anybody recommend one that they have successfully installed?
Thanks
-
CMSMJ1
- Moderators
- Posts: 7161
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Re: NC30 slip-on
You can buy a "can adapter" to suit the pipe work but my advice would be to keep the uncut system (if it is in good condition) and buy a half system and can for the proper experiemce...
You can get cut NC30 systems for not a lot
Welcome to the site - go have a read of the exhaust thread :)
You can get cut NC30 systems for not a lot
Welcome to the site - go have a read of the exhaust thread :)
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
The V4 is the law..
NC30 - No9 - my old mate