FZR 400 rr carbs

giller72 · Post by **giller72** » Mon Dec 15, 2014 6:54 pm

A long shot I know....but does anyone happen to have a spare top cap o-ring for a mikuni carb (FZR400rr). I had 4 when I took them apart but only 3 when I put them back together!!

Thanks
Andy

Post by **Evilchicken0** » Tue Dec 16, 2014 1:10 pm

I've heard of a couple of extra nuts but never not enough caps .... They're back so you might have knocked it off your work surface and it's skulking in the shadows

Post by **willandrip** » Tue Dec 16, 2014 4:22 pm

It's the tiny O ring.
They are not hard to loose,
Next time thread them on a bit copper wire.

Post by **Evilchicken0** » Tue Dec 16, 2014 5:00 pm

ahhh I see.

A Doh-ring

Try Lite Tek Blair

giller72 · Post by **giller72** » Tue Dec 16, 2014 6:42 pm

Just looked up litetek....amazing! will email them to see what they can do. Many thanks

KIYOSHI · Post by **KIYOSHI** » Sun Dec 21, 2014 12:04 pm

Try your local garage, or anywhere you might think will have I-rings in an assortment, sure they will let you have one :-)

Post by **Evilchicken0** » Sun Dec 21, 2014 1:16 pm

They're the really tiny ones about 4 mm outside dia

giller72 · Post by **giller72** » Sun Dec 21, 2014 3:28 pm

All sorted now, many thanks. Mr Lite Tek Blair was really helpful, it's a standard size o ring available from most o ring suppliers. Many thanks to all

FZR 400 rr carbs

FZR 400 rr carbs

Re: FZR 400 rr carbs

Re: FZR 400 rr carbs

Re: FZR 400 rr carbs

Re: FZR 400 rr carbs

Re: FZR 400 rr carbs

Re: FZR 400 rr carbs

Re: FZR 400 rr carbs