cbr400r aero butchered wiring help?

[crowsonpunk]

Hi everyone! got a 400aero and i'm struggling with the cdi wiring. I'm using a 600f diagram which is pretty much spot on but the issue i'm having is it seems to have a gold ky2 cdi which i'm led to believe is for the rr?

Main issue is atm i don't have a spark. I run a bike shop so I know my stuff but the ky2 cdi has one extra wire (yellow with a green stripe) than the bikes wiring. it has been fairly chopped about but the guy assures me it was running and had been fully serviced and set up by a dealer near us before it was stripped to go in his go kart (don't ask, its back in the frame now i've got it...) so it should run fine?

has anyone got an actual diagram for the aero or could tell me what wiring i should have to/from the cdi?

any help would be appreciated as atm i'm sort of spinning round in circles!

Thanks!

Jon.

[richyrd5]

If i remember the yellow/green wire is for the tacho(dont quote me on that though)and check the loom plugs as they corrode badl