NC29 Sprocket Collar

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
CBR400RR_Repsol
Settled in member
Posts: 41
Joined: Sun Feb 17, 2013 11:49 pm
NC29 Sprocket Collar

Post by CBR400RR_Repsol »

Hi all

Quick one really - just put my sprocket carrier back together - new bearing, dust seal, Renthal sprocket etc...Well my question is when I've seated the bearing, and put the new dust seal in I slide the collar in and it sits about 2mm proud of the dust seal???

Is this right? Its kind of hard to see from the Haynes photo but it looks a bit proud there...as mine is currently.

I'm just checking its not meant to be flush to the dust seal i.e. I haven't fully seated the bearing... :?:

Thanks all
Kev
Top
richyrd5
Regular Member
Posts: 743
Joined: Fri Feb 21, 2014 1:31 pm
Re: NC29 Sprocket Collar

Post by richyrd5 »

Yes the collar shouldnt be flush with the seal as it buts up against swingarm.
Top
Post Reply

Return to “Honda - Workshop”