Clutch noise
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
jamesthebok
- Settled in member
- Posts: 2
- Joined: Tue Sep 16, 2014 5:48 pm
Clutch noise
Looking for some advice. The clutch on my NC30 started juddering a little bit about a week ago. The judder seems to have lessened, but I now get a noise like a very rough bearing rumble when I disengage the clutch in neutral. The noise goes away when I select 1st, but I also hear it when slowing down to stop while still in gear. The clutch isn't slipping. Any advice? Tx, James. p.s. The starter has also been making a bit of a rumble / rough sound recently. Could these be related?
-
dgunthor
- Settled in member
- Posts: 167
- Joined: Wed Jan 21, 2009 4:48 pm
Re: Clutch noise
rough clutch release bearing?
-
jamesthebok
- Settled in member
- Posts: 2
- Joined: Tue Sep 16, 2014 5:48 pm
Re: Clutch noise
That was my first thought. However I may just be thick, but I couldn't find the release bearing indicated in the Haynes manual.
-
RickOliver
- Site Supporter
- Posts: 477
- Joined: Sun May 11, 2008 8:55 am
Re: Clutch noise
Take out the big circlip which holds the clutch lifter plate into the middle of the pressure plate, extract the lifter plate and turn it over- the release bearing is in a counterbored recess on the inside of the plate...
Rick
Rick