RVF HRC Setup
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
richyrd5
- Regular Member
- Posts: 743
- Joined: Fri Feb 21, 2014 1:31 pm
Re: RVF HRC Setup
ummm...i was told.by a few in the know.the rubber flaps stop heat soak from rising into the airbox..and dont route air into the airbox itself..????(que loads of replies saying thats bullshit!!).though i would think the larger flap would stop hot air from around the motor.so the smaller flap would not direct air into the airbox.but keep the air from being turbulent....yes??hunter wrote:The flap is there to direct air to the airbox,
No airbox no flap.
-
Drunkn Munky
- Site Supporter
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: RVF HRC Setup
Ok does anyone at all have HRC carbs fitted to a RVF that can tell me what jet sizes and needle settings they run?
I pissed about all weekend at cadwell starting with the smallest jets supplied (148F and 152R) and couldn't get it to fuel right, i thought it was too lean but from speaking to someone else it was likely too rich and i should be running 130 ish jets.
I pissed about all weekend at cadwell starting with the smallest jets supplied (148F and 152R) and couldn't get it to fuel right, i thought it was too lean but from speaking to someone else it was likely too rich and i should be running 130 ish jets.