Carb balancing vacuum take off

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
dunkenb
Regular Member
Posts: 560
Joined: Wed Jun 03, 2009 9:39 pm
Bike owned: Cbr400rr nc29 type8 NSR250
Location: West Midlands

Carb balancing vacuum take off

Post by dunkenb » Thu Jul 31, 2014 6:20 pm

Hi, anybody know what size the vaccum port thingys are (for balancing the carbs ).
Mine have been removed and replaced with bolts for some reason and i was gonna get some replacements from carbtune.
Trouble is they're either 5mm or 6mm ??? And im not sure which is correct
Cheers if anybody knows. :grin:
Top
User avatar
royster81
NWAA Supporter
NWAA Supporter
Posts: 2509
Joined: Wed Apr 30, 2008 8:04 pm
Bike owned: VFR400R-L NC30 CBR400RR-R NC29
Location: Belfast,Northern Ireland

Re: Carb balancing vacuum take off

Post by royster81 » Thu Jul 31, 2014 8:33 pm

Are you talking about the standard screws?

As standard the bike have screws blocking the holes then you swap out the screws for the brass rods to balancing.
It's not having what you want but wanting what you've got....Loud ,Proud and Modified ....
Top
dunkenb
Regular Member
Posts: 560
Joined: Wed Jun 03, 2009 9:39 pm
Bike owned: Cbr400rr nc29 type8 NSR250
Location: West Midlands

Re: Carb balancing vacuum take off

Post by dunkenb » Fri Aug 01, 2014 7:35 am

http://www.cmsnl.com/honda-cbr400rrr-nc ... ml#results

It should have parts 5 and 6 as standard , mine has some randome bolts in there. :o

Was thinking of using these

http://www.ekmpowershop28.com/ekmps/sho ... s-14-p.asp
Top
Post Reply

Return to “Honda - Workshop”