shims for cam carries/towera
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
twist&go
- Settled in member
- Posts: 46
- Joined: Sun Jul 31, 2011 9:39 pm
shims for cam carries/towera
Now then
Does anybody know of the company that makes the shims for the cam carries/towers after the heads have been skimmed
Have done a search but cant find the name
Thanks very much
Does anybody know of the company that makes the shims for the cam carries/towers after the heads have been skimmed
Have done a search but cant find the name
Thanks very much
-
hunter
- Site Supporter
- Posts: 1292
- Joined: Thu Nov 20, 2008 1:09 pm
Re: shims for cam carries/towera
It's something you will have to make yourself,
I have never known anyone to manufacture them.
I have never known anyone to manufacture them.
-
lukemillar
- Site Supporter
- Posts: 690
- Joined: Thu Aug 26, 2010 11:43 pm
- Bike owned: '89 NC30 Racebike #24
- Location: Wellington, New Zealand
Re: shims for cam carries/towera
What thickness are you looking for? I think I have a spare set of 0.508mm laser cut shims for both heads, though the rocker cover bolt shims are a little rougher (different supplier). I could be persuaded to let them go!