Replacing vacuum hose.

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
User avatar
simes205
NWAA Supporter
NWAA Supporter
Posts: 9
Joined: Wed Jul 03, 2013 9:51 pm
Bike owned: Vespa 300GTS, NC30
Location: Surrey, UK
Replacing vacuum hose.

Post by simes205 »

Hi,

Any tips on replacing the vacuum hose at the inlet end, without removing carbs, waterpump or swearing??!!

Thanks
Top
User avatar
simes205
NWAA Supporter
NWAA Supporter
Posts: 9
Joined: Wed Jul 03, 2013 9:51 pm
Bike owned: Vespa 300GTS, NC30
Location: Surrey, UK
Re: Replacing vacuum hose.

Post by simes205 »

Done it.
Long nose pliers, even longer nosed pliers.
After silicone spray didn't work, I soaked my new hose in boiling water and it pretty much slipped on!
Top
hawk2993
Settled in member
Posts: 90
Joined: Tue Jun 19, 2012 10:29 am
Re: Replacing vacuum hose.

Post by hawk2993 »

Or you can get someone with small hands to do it :D
Top
jimmytanko
Settled in member
Posts: 80
Joined: Fri Oct 25, 2013 11:38 pm
Re: Replacing vacuum hose.

Post by jimmytanko »

hawk2993 wrote:Or you can get someone with small hands to do it :D
like jeremy beadle
Top
Neosophist
Moderators
Moderators
Posts: 8172
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954
Re: Replacing vacuum hose.

Post by Neosophist »

simes205 wrote:Hi,

Any tips on replacing the vacuum hose at the inlet end, without removing carbs, waterpump or swearing??!!

Thanks
waterpump!?

thats nowhere near the vaccum hose..
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
Top
User avatar
Speedy
NWAA Supporter
NWAA Supporter
Posts: 483
Joined: Fri May 02, 2008 8:29 pm
Bike owned: RVF400RR, ER6n
Location: Middx, U.K.
Re: Replacing vacuum hose.

Post by Speedy »

Well spotted, but I've a feeling he/she actually means the stat.
When the mind is relaxed, the body will go faster! 8-)
Top
User avatar
simes205
NWAA Supporter
NWAA Supporter
Posts: 9
Joined: Wed Jul 03, 2013 9:51 pm
Bike owned: Vespa 300GTS, NC30
Location: Surrey, UK
Re: Replacing vacuum hose.

Post by simes205 »

I did mean that.
Hose went on easily in the end. WArmed the pipe up with hot water and it slipped on lovely.
It didn't solve the issue though!
Ended up replacing the diaphragms in the fuel tap and now all is good.
Top
Post Reply

Return to “Honda - Workshop”