Electric Fuel Pumps
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Posts: 15
- Joined: Sun Jun 01, 2014 1:18 pm
Re: Electric Fuel Pumps
Quick update on this...
I fitted a facet low pressure solid state fuel pump. Cost me £17, seems to run OK on this but won't know for sure until I get it on the road. I made up a simple bracket to fit it off the existing mounts.
I fitted a facet low pressure solid state fuel pump. Cost me £17, seems to run OK on this but won't know for sure until I get it on the road. I made up a simple bracket to fit it off the existing mounts.
-
- Settled in member
- Posts: 106
- Joined: Tue May 20, 2008 9:11 am
- Location: Washington. Tyne & Wear.
Re: Electric Fuel Pumps
What...can't believe the Downpipes don't need any welding 

-
- Settled in member
- Posts: 15
- Joined: Sun Jun 01, 2014 1:18 pm
Re: Electric Fuel Pumps
The only thing on the bike that doesn't need fixing!
-
- Settled in member
- Posts: 15
- Joined: Sun Jun 01, 2014 1:18 pm
Re: Electric Fuel Pumps
Getting there!
Work done so far...
New Fork Seals & Oil.
New Pads All round, All brakes bled (Still have braided lines to fit to front)
Engine Oil & Filter
New Plugs, replaced 1 x Coil
Fitted Facet Fuel Pump
Repaired Exup Cables
Repaired Damaged Start Inhibit Wiring & Tidied all wiring and Greased Terminals
Balanced Carbs
Fitted Front Fairing Bracket & Clocks (Was missing)
Now working on the body work so it looks like less of a shed. Hope to see you on track next year!
Work done so far...
New Fork Seals & Oil.
New Pads All round, All brakes bled (Still have braided lines to fit to front)
Engine Oil & Filter
New Plugs, replaced 1 x Coil
Fitted Facet Fuel Pump
Repaired Exup Cables
Repaired Damaged Start Inhibit Wiring & Tidied all wiring and Greased Terminals
Balanced Carbs
Fitted Front Fairing Bracket & Clocks (Was missing)
Now working on the body work so it looks like less of a shed. Hope to see you on track next year!
-
- Settled in member
- Posts: 106
- Joined: Tue May 20, 2008 9:11 am
- Location: Washington. Tyne & Wear.
Re: Electric Fuel Pumps
Fresh Coolant?
Oiled Throttle and Clutch Cable?
Oiled Throttle and Clutch Cable?
-
- Site Supporter
- Posts: 5374
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: Electric Fuel Pumps
Fuel filter
-
- Settled in member
- Posts: 15
- Joined: Sun Jun 01, 2014 1:18 pm
Re: Electric Fuel Pumps
Yes, Yes and Yes!

