Thermostat Query NC35

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
User avatar
DoktorMandrake
NWAA Supporter
NWAA Supporter
Posts: 133
Joined: Sat Oct 03, 2009 8:37 pm
Bike owned: NC35 & NC30 x3

Thermostat Query NC35

Post by DoktorMandrake » Mon Jun 02, 2014 7:39 pm

I was bleeding my RVF rad and noticed that coolant was freely flowing from thermostat through the top hose into the top rad. I assumed this would only happen when engine was up to temp? Engine heats up, thermostat opens, coolant circulates. To me free flowing coolant from cold indicates defective thermostat or am I wrong?

User avatar
scubasteve
NWAA Supporter
NWAA Supporter
Posts: 49
Joined: Thu Mar 01, 2012 2:18 pm
Bike owned: 2xNC30's
Location: Lincolnshire

Re: Thermostat Query NC35

Post by scubasteve » Tue Jun 03, 2014 12:15 am

Yeah,
I'd agree with that. Sounds like your thermostat is jammed either part way open or fully open. I took mine out when I was having cooling problems and dropped it in a pan of water and brought the water up to boil to see if it was opening and closing at the correct temperatures. A new thermostat housing o ring was only a few pound to replace from rick Oliver.
Bikes don't leak oil, they mark their territory.

User avatar
DoktorMandrake
NWAA Supporter
NWAA Supporter
Posts: 133
Joined: Sat Oct 03, 2009 8:37 pm
Bike owned: NC35 & NC30 x3

Re: Thermostat Query NC35

Post by DoktorMandrake » Tue Jun 03, 2014 8:47 am

Thanks Steve for confirming my suspicions, will take it out and check. Think I have a gasket somewhere too, so simple enough.

Post Reply