Coil location on a 3TJ racebike

Post by **Drunkn Munky** » Sat Jan 25, 2014 6:04 pm

Where is the prefered location to mount the coils on a racebike running ram air? As i didnt have the pleasure of stripping the bike down i dont know where they were mounted to begin with and using my roadbike for reference they clearly wasnt keep in the stock position.

Road bike

Race bike

Post by **dobbslc** » Sun Jan 26, 2014 7:41 pm

I've got a pair of dyno coils mounted on the front fairing bracket. I've got a pic but as usual can't get the bloody thing to upload!
The coils should be out of the way where they fit as standard as the ducting doesn't go near them as far as I can see.

jtodd1968 · Post by **jtodd1968** » Sun Jan 26, 2014 8:06 pm

Cable tie em using upper holes in headstock brace in the pics wi the ram air u got if u got bdk ramair use holes in lower headstock bracing where coils mount wi cable ties?

Kurlon · Post by **Kurlon** » Fri Jan 31, 2014 7:25 pm

jtodd1968 wrote:Cable tie em using upper holes in headstock brace in the pics wi the ram air u got if u got bdk ramair use holes in lower headstock bracing where coils mount wi cable ties?

Did someone else make a ram air setup for 3TJs besides BDK?

Post by **Drunkn Munky** » Fri Jan 31, 2014 7:36 pm

The one i have isnt BDK, more of a home made jobbie

Post by **hawksuspension** » Mon Feb 03, 2014 4:45 pm

Harris made a kit copy back in the days and you just ran/made your own tubes

Sure I still have one in the stash somewhere waiting for the next 3tj to come along lol

Coil location on a 3TJ racebike

Coil location on a 3TJ racebike

Re: Coil location on a 3TJ racebike

Re: Coil location on a 3TJ racebike

Re: Coil location on a 3TJ racebike

Re: Coil location on a 3TJ racebike

Re: Coil location on a 3TJ racebike