Fzr400 swingarm bearing question

Post by **Evilchicken0** » Sat Dec 21, 2013 10:40 pm

It looks like a 3TJ part so it might not be available in the US.

Dap019 · Post by **Dap019** » Sat Dec 21, 2013 10:52 pm

imma call speedwers next week and see if they hav come accross one in thier shop for me. but most likely over the pond again. i was just hoping someone had a spare NOS one laying around in the US i could get off of them. but i will find one regardless. thanks bro

Post by **Evilchicken0** » Sun Dec 22, 2013 12:43 am

Um .... this is more of a Britishforum and we have our customs ... so time for a pic or two

rockTJ · Post by **rockTJ** » Sun Dec 22, 2013 1:00 am

Searching that bearing part number up on ebay also comes up with 04-08 R1 swingarm bearings.........

I wonder what the dimensions of that swinger are

Dap019 · Post by **Dap019** » Sun Dec 22, 2013 2:21 am

well i hope those bearings will fit. its a gamble but i bought em anyway. now i just need to find a new 3tj chain guide/guard in the US/ prob gonna hav to get them overseas again. shipping costs SUCK. but i will figure out something, i really hope those bearing fit. would make life easier. lol thanks bro.

Dap019 · Post by **Dap019** » Sun Dec 22, 2013 2:23 am

as for pics i only have a cell phone and im dumb wit electronics. cant figure out how to email pics from my phone, bummer. i will post wheni get them in and let yall know if the bearing are the right ones. cheers again. D

Post by **Kayla850** » Sun Dec 22, 2013 8:20 am

rockTJ wrote:Searching that bearing part number up on ebay also comes up with 04-08 R1 swingarm bearings.........

I wonder what the dimensions of that swinger are

Too long, too wide and with a totally different linkage arrangement. Other than it's a sterling idea!

Post by **Kayla850** » Sun Dec 22, 2013 8:23 am

Dap019 wrote:well i hope those bearings will fit. its a gamble but i bought em anyway. now i just need to find a new 3tj chain guide/guard in the US/ prob gonna hav to get them overseas again. shipping costs SUCK. but i will figure out something, i really hope those bearing fit. would make life easier. lol thanks bro.

The last ones I got came from Fowlers in Bristol and cost around £40 each. I'd imagine postage to the US would be around £10 or so if that helps with working out costs and stuff.

Post by **willandrip** » Sun Dec 22, 2013 10:06 am

Dap019 wrote:well i hope those bearings will fit. its a gamble but i bought em anyway. now i just need to find a new 3tj chain guide/guard in the US/ prob gonna hav to get them overseas again. shipping costs SUCK. but i will figure out something, i really hope those bearing fit. would make life easier. lol thanks bro.

The bearings I linked are correct .
There are various fitments inc. 04/08 YZF.
Just because a bearing is fitted to a part it does not equate that the part will fit.

A good Yamaha dealer in any country should be able to obtain any part if supplied with a part number given that the part is still available.

Often,in Europe, we use a firm called CMSL from Holland.
They specialise in buying old stocks from dealers that are NLA from the manufacturer and reselling.
Shipping is quite expensive but you would get a reduction of 20% on the total as USA pays no V.A.T.

http://www.cmsnl.com/products/sealguard_3tj2215100/

Dap019 · Post by **Dap019** » Wed Dec 25, 2013 3:27 am

thanks for the advice. i still have a number of older parts to get. great forum.

Fzr400 swingarm bearing question

Re: Fzr400 swingarm bearing question

Re: Fzr400 swingarm bearing question

Re: Fzr400 swingarm bearing question

Re: Fzr400 swingarm bearing question

Re: Fzr400 swingarm bearing question

Re: Fzr400 swingarm bearing question

Re: Fzr400 swingarm bearing question

Re: Fzr400 swingarm bearing question

Re: Fzr400 swingarm bearing question

Re: Fzr400 swingarm bearing question