New nc30 parts

[steve92]

I'm trying to get some nuts and bolts and small bits and pieces for the project.

What would be the handiest way to find out whats still available from honda, is there site on the net to look up and order parts.?

[james66]

You doing a restoration project?

[steve92]

Well kind of, nc30 with vfr750 engine in it. Started with a bare frame so basically everything i've bought for it now has come in the post. Its just some of the small parts i cant get off ebay.

The build is on here in the project threads.

[Neosophist]

Well kind of, nc30 with vfr750 engine in it. Started with a bare frame so basically everything i've bought for it now has come in the post. Its just some of the small parts i cant get off ebay.

The build is on here in the project threads.

cmsnl.com has the microfiches if you search for vfr400, they also have parts in stock.

you can always copy the part number and put it into either lings honda or david silvers and they will tell you if they have it.

best to try all 3 as they are all parts warehouses and often keep a lot of old stock

[williamshatnerspants]

Hi Steve,

Might not help you but for those in New Zealand and Australia (and perhaps beyond). Econohonda have a parts list online:

http://www.econohonda.co.nz/honda_motor ... k_list.pdf

Find the part in the parts manual, search for it on the above pdf, then email Malcolm (see home page) for a quote. They have new and second hand parts (noted in the pdf), and the prices are good.

Matt

[abrmoto]

If you get the part numbers and pics drop me a line got loads of that type of stuff kicking around in boxes here. May not have everything but nuts, bolts brackets should have um.

[steve92]

Got sorted now thanks. That cmsnl.com site is real handy to have, i'll be using that again.