Correct nc30 c spanner
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
benny
- NWAA Supporter
- Posts: 623
- Joined: Sat Jan 12, 2013 9:36 pm
- Bike owned: NC30 (track), ZX-9R (road)
- Location: Nottinghamshire
Correct nc30 c spanner
Is this it? Was what I was recommended from here and was listed as nc30
BRS Racing for up to date bike build and race results.
TT Zero for the electric Superbike build.
DM104 for the road race team.
TT Zero for the electric Superbike build.
DM104 for the road race team.
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: Correct nc30 c spanner
Looks like it to me.
It doubles as the shock preload adjusting tool (second tooth needed for this).
Edit: could be wrong about the preload adjustor, I think mines from a different model?
It doubles as the shock preload adjusting tool (second tooth needed for this).
Edit: could be wrong about the preload adjustor, I think mines from a different model?
Last edited by Cammo on Thu Oct 31, 2013 11:12 pm, edited 2 times in total.
"It's just a ride" Bill Hicks
-
alexwitham
- Site Supporter
- Posts: 1340
- Joined: Wed May 20, 2009 10:04 pm
- Bike owned: 675R, GSXR6, NC30
- Location: Norwich
Re: Correct nc30 c spanner
Mine does not look like that...
-
hunter
- Site Supporter
- Posts: 1292
- Joined: Thu Nov 20, 2008 1:09 pm
Re: Correct nc30 c spanner
That's not the original style,It was smaller than that.
-
Morespeedvicar
- Site Supporter
- Posts: 837
- Joined: Thu May 01, 2008 1:37 am
- Bike owned: Fzr400, NC30, CB50J, SS50Z KLR
- Location: Grimsby
Re: Correct nc30 c spanner
Big hammer and drift..........................
-
JZH
- Site Supporter
- Posts: 249
- Joined: Mon Oct 27, 2008 7:02 pm
- Bike owned: RSCBRRVFVFRST
- Location: London, UK/So.Cal., USA
- Contact:
Re: Correct nc30 c spanner
The NC30/35,RC30/35 hub is a smaller diameter (105mm) than the RC45/46 (117mm), so each have specific Honda tools for adjustment. That said, you can probably get away with using a larger tool on a smaller hub (steady...)
Ciao,
Ciao,