CB400SF exhaust on a CB-1

CB1upper · Post by **CB1upper** » Sat Sep 14, 2013 6:30 am

Anyone know if this is possible? Not having the sf here in the states I'm left looking at photos. Eyeballing that sweet cyclone system yoshi makes. At the very least I assume modifications may have to be made to move mounting brackets and mid pipe changes. If the headers clear think I could manage.

Gidanski · Post by **Gidanski** » Sat Sep 14, 2013 11:41 am

As far as I know it is exactly the same engine. Which means the headers will bolt onto the engine. As for the rest of the system it would be more of a try it and see thing as mounting brackets will more then likely be different.

TurboPropRoss · Post by **TurboPropRoss** » Sat Oct 12, 2013 11:35 am

I don't think they are the same engine- the CB-1 uses gear driven cams while the CB400 SF uses a chain. That, combined with the difference in the suspension setups leads me to believe it won't be quite so easy to mount the exhaust from one onto the other. HTH.

CB400SF exhaust on a CB-1

CB400SF exhaust on a CB-1

Re: CB400SF exhaust on a CB-1

Re: CB400SF exhaust on a CB-1