VFR NC24 rear shock

[Emzed]

Does anyone know if the VFR NC24 rear shock will fit the NC23

I've bought one but not recieved it yet & the guy is prepared to re-list it if I don't want it

Has anybody fitted one

Any info would be much appreciated

Em

BTW I'll be posting soon about my experiences with the NC23 & putting some pics up

[jim157]

You'd be far better off fitting a newer CBR600 shock than a knackered old NC24 shock. I'm not certain if the NC24 shock would fit the NC23 but they were a bit crap when new anyway.

Graeme France should be able to sort you out.

[Emzed]

Thanks Jim

I'll probably upgrade the spring on my spare shock as the damping is fine just the spring is too hard for solo work

It's fine with a pilly but finding one small enough as regular "ballast", is proving difficult and restrictive

Em

BTW any particular model or year of CBR 600 I should be looking at for a donor shock

[jim157]

I'm pretty sure that the first 'jelly mould' CBR600 shocks fit. There's some info in this thread:-
viewtopic.php?f=28&t=26290

Alternatively if you fancy splashing out a bit more GF does a kit with the linkage and upgraded spring:-
http://www.gfracinguk.com/cbr400-nc23-t ... -8_10.html