Rocker cover question
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
steed
- Settled in member
- Posts: 8
- Joined: Wed Jul 24, 2013 11:10 pm
Rocker cover question
Well i have recently acquired an NC21 engine for my project and after unloading it from my car i think i have spotted the first problem, the breather pipe connection from the rear rocker cover has sheared off, there is just a whole where i think a pipe should be:
I have spotted a replacement rocker cover on ebay, although it is an NC24 one. Now from what i have read the blocks are almost the same apart from a few internal revisions. my question is will an NC24 coverfit striaght onto the NC21 head without any issues?
I have spotted a replacement rocker cover on ebay, although it is an NC24 one. Now from what i have read the blocks are almost the same apart from a few internal revisions. my question is will an NC24 coverfit striaght onto the NC21 head without any issues?
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: Rocker cover question
yes it will.
That part shouldnt have allen head bolts in it either so somebody has been fiddling about with ti...
That part shouldnt have allen head bolts in it either so somebody has been fiddling about with ti...
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
steed
- Settled in member
- Posts: 8
- Joined: Wed Jul 24, 2013 11:10 pm
Re: Rocker cover question
i think they are leftovers of a stainless bolt kit. thanks for the swift reply!