Dash 'half' working
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
SteveNC35
- Site Supporter
- Posts: 43
- Joined: Tue Mar 19, 2013 6:54 am
- Bike owned: CBR1000RR, RVF400
- Location: Tasmania, Australia
Dash 'half' working
The issue I'm having at the moment is that the rev counter is working but the speedo isn't. I've tried two different sets of clocks. Any suggestions?
-
jetblack
- Site Supporter
- Posts: 516
- Joined: Sat Apr 24, 2010 5:21 pm
- Bike owned: '89 NC30 SEED
- Location: Nottingham
Re: Dash 'half' working
check the cable and the drive
It don't matter if i'm fixin' it or ridin' it.
xivlia wrote:sorry about that whole thing jetblack, i just got confused about the whole thing, and i didnt mean any disrespect to you.
-
Malc
- Site Supporter
- Posts: 223
- Joined: Tue Apr 08, 2008 5:01 pm
- Bike owned: NC35, 5SL, 3XV, 2MA
- Location: Sharpthorne
Re: Dash 'half' working
Tacho is electrical, whereas the speedo is mechanical. Check the plastic drive between the cable housing and front sprocket - it is very common for these to round off. If it has, check the drive and the cable to ensure they are free from shite before replacing it as they round easy with resistance from bunged up cable or drive.
-
speedy231278
- NWAA Supporter
- Posts: 1549
- Joined: Tue Jul 03, 2012 11:58 am
- Bike owned: RVF400, TZR125, ZXR750R
Re: Dash 'half' working
They can also get forced too far onto the tab that protrudes from the cable drive mechanism, and be pushed away from the sprocket. A couple of washers behind it sorted that for me.
-
SteveNC35
- Site Supporter
- Posts: 43
- Joined: Tue Mar 19, 2013 6:54 am
- Bike owned: CBR1000RR, RVF400
- Location: Tasmania, Australia
Re: Dash 'half' working
Cheers guys, I'll have a look in the morning!
-
Jac-al
Re: Dash 'half' working
Hey, im having the same problem.
Ive checked all of the above and its a new cable.
Anything else that could cause this?
NOt sure what u mean Speedy
Ive checked all of the above and its a new cable.
Anything else that could cause this?
NOt sure what u mean Speedy