Speedo issue and other q's

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
GlenR
Settled in member
Posts: 18
Joined: Sun Aug 21, 2011 8:10 am

Re: Speedo issue and other q's

Post by GlenR » Mon Jun 17, 2013 10:37 am

Thanks so much for all the replies fellas, really appreciate it.

hmm! the rad could be an NC30 one then, the peg is definitely rounded but it doesn't fit all the way on it, id say its probably about 10-15mm off, and indeed you'd struggle to get a piece of paper between the bottom and the cam cover. Will snap some pics later.

If you could have a look whenever gavins that'd be awesome! no rush :)

Cheers.
Top
User avatar
gavins
Site Supporter
Site Supporter
Posts: 133
Joined: Tue Feb 16, 2010 1:45 pm
Bike owned: NC30, ER6f, K5 750
Location: Worthing, West Sussex

Re: Speedo issue and other q's

Post by gavins » Mon Jun 17, 2013 7:03 pm

Here's a (crummy) pic of my stock NC35 clipon. You can see it's secured by a single pinch bolt, has a ridge in the centre and the bars are risen up almost to the level of the top yoke. You can see the tab on the left edge that locates into the top yoke.

Image
Top
Post Reply

Return to “Honda - Workshop”