another problem in my nc23
its hard to shift gears
i pull the clutch all the way in when i hit the 1st or the 2nd or any of the other gears its like so heavy ( the pedal its like something stuck on it )
any help ?
nc23 gears problem
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
bido600
- Settled in member
- Posts: 21
- Joined: Fri Dec 28, 2012 11:10 pm
nc23 gears problem
hey guys again
another problem in my nc23
its hard to shift gears
i pull the clutch all the way in when i hit the 1st or the 2nd or any of the other gears its like so heavy ( the pedal its like something stuck on it )
any help ?
another problem in my nc23
its hard to shift gears
i pull the clutch all the way in when i hit the 1st or the 2nd or any of the other gears its like so heavy ( the pedal its like something stuck on it )
any help ?
-
ZXESAS
- Settled in member
- Posts: 28
- Joined: Fri May 10, 2013 6:05 pm
Re: nc23 gears problem
Have you changed your oil? Maybe your clutch needs to be replaced! Hope this helps 
-
Emzed
- Settled in member
- Posts: 29
- Joined: Wed Nov 14, 2012 6:16 pm
- Bike owned: NC23J/K,750Paso x2,MZ's,BMW C1
- Location: Malton ( Nr Scarbro )
Re: nc23 gears problem
Is there enough or "any" oil in it
Em
-
bido600
- Settled in member
- Posts: 21
- Joined: Fri Dec 28, 2012 11:10 pm
Re: nc23 gears problem
1st thanks guys for the reply
i've checked the oil it's between max and min near to the max
and the oild is new only made 100km with it
still the same prob
i've checked the oil it's between max and min near to the max
and the oild is new only made 100km with it
still the same prob
-
bazz
- Settled in member
- Posts: 19
- Joined: Wed Apr 13, 2011 1:57 am
- Location: Bristol, England
Re: nc23 gears problem
hi
is this a sudden issue or has it developed over time? has the bike been dropped or fallen off the stand?
bazz
is this a sudden issue or has it developed over time? has the bike been dropped or fallen off the stand?
bazz
-
Davez29
- Site Supporter
- Posts: 1268
- Joined: Sun Aug 03, 2008 8:38 pm
- Bike owned: NC29 forever
Re: nc23 gears problem
Is your chain adjusted correctly and not too tight as if it was too tight it would give a clunky feel when selecting a gear. Check several times rolling the bike forward a bit at a time in case its tight on one spot. Clean and adjust as needed. Best err on a "little" slacker if the chain does have tight spots.