Blue spot calipers

[StreetFZR]

Anybody know if the standard FZR4 master cylinder will be ok with blue spots??

I have just fitted some to my FZR1000 forks ready for fitting to bike, just need a master and might use mine and sell my callipers.

[Kayla850]

Anybody know if the standard FZR4 master cylinder will be ok with blue spots??

I have just fitted some to my FZR1000 forks ready for fitting to bike, just need a master and might use mine and sell my callipers.

Hiya

It'll work but it'll feel really firm, it's better to use a 14mm one if you can. I think we've got one spare if you need one- swap for your 3TJ swingarm if we do?

[StreetFZR]

Hey

I will be up Tuesday or Wednesday, if you got one we got a deal

[Kayla850]

Hey

I will be up Tuesday or Wednesday, if you got one we got a deal

Okey dokey.

[Evilchicken0]

How does a 14mm stack up against a 19x20 or 18x20 ?

[Kayla850]

http://i.ebayimg.com/t/YAMAHA-FZR-400-R ... ~60_57.JPG

How does the top fork leg bolt fasten on, or is it just being used as a pin and the lockwire is keeping in in place? There's not much room to fit a bolt head or nut behind there once the caliper is on. Is the caliper machined further in to clear the nut?

[mjh100]

Hi guys, blue spot calipers onto fzr400 3tj, you will need

Set donor blue spot calipers - they need sending in for machining to the two mounting arms
r6/r1 master cylinder ( im using r6 5eb - perfect ) - you can use std master but its not great !!!
offset bracket complete manufacture including new mounting bolts ( see attached pic )

available from PM Racing - ring Pete on 07980 926018
Lead time about 3 weeks
Ring for price

Done on my wet / twisty race bike, awesome results, can ring me on 07984073728 if any questions - hope this helps

all the best Mike

http://youtu.be/Epe4ykEoGuQ

[CRM]

removed the double post
not sure why you submitted that twice.