quick question as i dont have my haynes manual to hand, in the process of cleaning my rear shock, and ideally i want to remove the spring to be able to get at the shock body properly, shocks off the bike, i just wondered if i need to compress the spring to remove and re install it?
thanks in advance.
chris
nc30 rear spring removal
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
nc30chris
- Settled in member
- Posts: 56
- Joined: Fri Apr 20, 2012 3:36 pm
- Bike owned: '92 nc30
- Location: norwich, norfolk
-
gavins
- Site Supporter
- Posts: 133
- Joined: Tue Feb 16, 2010 1:45 pm
- Bike owned: NC30, ER6f, K5 750
- Location: Worthing, West Sussex
Re: nc30 rear spring removal
I'm pretty sure you need a spring compressor of some description to get the stock NC30 spring off.
-
iDemonix
- Site Supporter
- Posts: 651
- Joined: Tue Aug 24, 2010 10:26 pm
- Bike owned: '92 NC30
- Location: Banbury, Oxfordshire
Re: nc30 rear spring removal
As above you'll need to get your hands on a spring compressor.
A roaring V4 is the summer soundtrack.