carb/throttle cable set up

Adderboy · Post by **Adderboy** » Wed Mar 20, 2013 3:07 pm

Hi again all
So, went to put on my nice new set of throttle cables from GF and found the pull to be 120 mm shorter than the old one, making it simply impossible to work, the cables I ordered are for an NC30, as that is the bike I have but my carbs are rvf ones. Long story short have I requested the wrong cables ? Do I need NC35 ones instead?
Many thanks
F

Post by **speedy231278** » Wed Mar 20, 2013 3:17 pm

I'd say yes. The throttle cables are attached in different places. On the 30, it's the #2 carb (front left) and on the 35 it's the #1 carb (rear left). Hence why 35 cables would be longer.

Adderboy · Post by **Adderboy** » Wed Mar 20, 2013 3:19 pm

Damn, OK thanks I'll see if he'll let me swap them back

Post by **CMSMJ1** » Wed Mar 20, 2013 3:54 pm

you need RVF cables..

carb/throttle cable set up

carb/throttle cable set up

Re: carb/throttle cable set up

Re: carb/throttle cable set up

Re: carb/throttle cable set up