Rocker Cover gasket
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
leopard_pagan
- Senior Member
- Posts: 1184
- Joined: Thu May 01, 2008 6:42 am
- Bike owned: CBR400/600 Fighter
- Location: Mildenhall-Suffolk
- Contact:
Rocker Cover gasket
any tips on changing one?
Haynes mention swinging Radiator forward coz they love that kind of thing...
do i really need to? or can i get to all the bolts with out doing that?
when i do the plugs i usually:
tank, air box,coils off
the rubber skirt i pull up & duct tape it to the frame out the way....
figuring that past the plugs i am pretty much there for the cover bolts.
Haynes mention swinging Radiator forward coz they love that kind of thing...
do i really need to? or can i get to all the bolts with out doing that?
when i do the plugs i usually:
tank, air box,coils off
the rubber skirt i pull up & duct tape it to the frame out the way....
figuring that past the plugs i am pretty much there for the cover bolts.
-
Davez29
- Site Supporter
- Posts: 1268
- Joined: Sun Aug 03, 2008 8:38 pm
- Bike owned: NC29 forever
Re: Rocker Cover gasket
I found i had to drop the radiator, no hoses are detached, doesnt take long to do and its fairly easy to get too for removal but as usual pulling the cover seemed easier than putting it back, still not hard though. Best remove other parts you mentioned as well.