NC35 Wheels
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
mo haggs
- Site Supporter
- Posts: 618
- Joined: Thu Jun 19, 2008 1:02 pm
- Bike owned: bikeless
- Location: belfast, n.ire
Re: NC35 Wheels
i too would like one
vic-vtrvfr wrote:they're like rocking horse poo with sprinkles of unicorn horn on top.
-
CRM
- Admin NWAA
- Posts: 2972
- Joined: Sat Apr 05, 2008 2:06 pm
- Location: NorthWest
- Contact:
Re: NC35 Wheels
UPDATE
Ok chaps, this is looking like it's going to work out at £190 a wheel delivered to mainland UK.
Now we have estimated on customs charges and other things too, so it may actually work out a bit cheaper - but we wont know until they actually land. It goes without saying the £190 is worst case scenario for a wheel posted to the UK, and possibly cheaper if we can pass these savings on.
Liam will be along to add more if i have missed anything.
So who's still in ? if this thread goes quiet as i very much suspect it will (as i reckon everyone was hoping for a £100 wheel) then it's unlikely the order will proceed.
However if people are still keen, we will lock this and start a new thread, where we can keep it clean from the "can i have one in red and 5.5 inch please" comments and deposits can be taken.
Ok chaps, this is looking like it's going to work out at £190 a wheel delivered to mainland UK.
Now we have estimated on customs charges and other things too, so it may actually work out a bit cheaper - but we wont know until they actually land. It goes without saying the £190 is worst case scenario for a wheel posted to the UK, and possibly cheaper if we can pass these savings on.
Liam will be along to add more if i have missed anything.
So who's still in ? if this thread goes quiet as i very much suspect it will (as i reckon everyone was hoping for a £100 wheel) then it's unlikely the order will proceed.
However if people are still keen, we will lock this and start a new thread, where we can keep it clean from the "can i have one in red and 5.5 inch please" comments and deposits can be taken.
Insert Signature Here
-
mo haggs
- Site Supporter
- Posts: 618
- Joined: Thu Jun 19, 2008 1:02 pm
- Bike owned: bikeless
- Location: belfast, n.ire
Re: NC35 Wheels
50 quid more than id have liked
but for a NEW wheel at around the same price as a used one - yeah im still in.
but for a NEW wheel at around the same price as a used one - yeah im still in.
vic-vtrvfr wrote:they're like rocking horse poo with sprinkles of unicorn horn on top.
-
alexwitham
- Site Supporter
- Posts: 1340
- Joined: Wed May 20, 2009 10:04 pm
- Bike owned: 675R, GSXR6, NC30
- Location: Norwich
Re: NC35 Wheels
I am also still in for 1 assuming the order is still 4.5 x 17 in powdercoat black, ready to send full payment.
-
Yakama
- Site Supporter
- Posts: 1369
- Joined: Wed Apr 30, 2008 5:27 pm
- Bike owned: NC23s, 29, 30s, MC16
- Location: Oban
Re: NC35 Wheels
Yes that will be new 4.5 x 17 powdercoated black wheels, the rest is as Paul stated above
-
micpec
- Site Supporter
- Posts: 1298
- Joined: Sat May 03, 2008 9:11 pm
- Bike owned: NC35’s, NC30 sold, MC34 many
- Location: The Netherlands
Re: NC35 Wheels
@Yakama, @Paul, how will this work out for postage to me across the channel on the mainland for let's say one or two rear wheels? I'd like to be sure on the numbers I need to calculate with. Thx guys!
"Action without Philosophy is a lethal weapon; Philosophy without action is worthless"
-
V4beermonster
- Site Supporter
- Posts: 411
- Joined: Thu Sep 08, 2011 7:44 pm
- Bike owned: Vfr400,gt750,vfr400/750cc
- Location: telford shrops
- Contact:
Re: NC35 Wheels
I'm in too
-
NGneer
- Site Supporter
- Posts: 794
- Joined: Wed Jan 21, 2009 7:37 am
- Bike owned: x3 NC30,Matchless G80s AJS16ms
- Location: Köln
Re: NC35 Wheels
also still in......
(and sorry about the poo
)
(and sorry about the poo
)-
Delboy
- Site Supporter
- Posts: 836
- Joined: Mon May 11, 2009 3:25 pm
- Bike owned: NC30
-
speedy231278
- NWAA Supporter
- Posts: 1549
- Joined: Tue Jul 03, 2012 11:58 am
- Bike owned: RVF400, TZR125, ZXR750R
Re: NC35 Wheels
Any idea on lead time?
As for customs, it's pretty simple. If these wheels are coming from within the EU, there'll be nothing. If they are coming from outside, then assuming the seller declares the true value on the consignment, you add 3.7% to the total cost of the goods, insurance and shipping to get the VATable value, then add 20% VAT. So if you buy £2000 of wheels, and they cost £250 to ship and £25 insurance, you have £2275+3.7%=£2359.18, plus VAT@20%= £2831.01 in total. Of course, if the seller fudges the customs forms, then that's a different matter, although if they go silly it could cause delays if they investigate why a dozen motorcycle wheels have an alleged value of £25.... lol
As for customs, it's pretty simple. If these wheels are coming from within the EU, there'll be nothing. If they are coming from outside, then assuming the seller declares the true value on the consignment, you add 3.7% to the total cost of the goods, insurance and shipping to get the VATable value, then add 20% VAT. So if you buy £2000 of wheels, and they cost £250 to ship and £25 insurance, you have £2275+3.7%=£2359.18, plus VAT@20%= £2831.01 in total. Of course, if the seller fudges the customs forms, then that's a different matter, although if they go silly it could cause delays if they investigate why a dozen motorcycle wheels have an alleged value of £25.... lol
