Nc30 shims
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
V4beermonster
- Site Supporter
- Posts: 411
- Joined: Thu Sep 08, 2011 7:44 pm
- Bike owned: Vfr400,gt750,vfr400/750cc
- Location: telford shrops
- Contact:
Nc30 shims
Just done valve clearances on bike I'm about to start building 1 shim is missing(not in engine I nicked it for my bike) heats best way to sort the clearance on the 1 valve do I just put any old shim in it? And calculate from there what I need?
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: Nc30 shims
Yes.
Put any shim in there you have and measure it up
The only problem will be if the shim is too big you will need to use a smaller one so you have a gap to measure., should be easy to calculate what size you need from there
Put any shim in there you have and measure it up
The only problem will be if the shim is too big you will need to use a smaller one so you have a gap to measure., should be easy to calculate what size you need from there
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
V4beermonster
- Site Supporter
- Posts: 411
- Joined: Thu Sep 08, 2011 7:44 pm
- Bike owned: Vfr400,gt750,vfr400/750cc
- Location: telford shrops
- Contact:
Re: Nc30 shims
Thanks for fast reply will get it done