FZR400 down pipes?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
thunderace
- Site Supporter
- Posts: 1584
- Joined: Fri Sep 10, 2010 9:03 pm
- Bike owned: R6, YZF600R
- Location: Blackburn, Lancs.
Re: FZR400 down pipes?
1WG headers won't fit the 3TJ without some serious modifications. The 3TJ exhaust ports are larger and the cylinder spacing is slightly different.rockTJ wrote: Have you ever tried 1WG systems on the 3TJ??? Only asking as I found a set of headers for a 1WG on ebay
Conventional wisdom says to know your limits. To know your limits you need to find them first. Finding your limits generally involves getting in over your head and hoping you live long enough to benefit from the experience. That's the fun part.
-
alexday93
- One Hit Wonder
- Posts: 1
- Joined: Fri Sep 14, 2012 12:15 am
Re: FZR400 down pipes?
hey i had the same problem with my 3tj
http://www.ebay.co.uk/itm/FZR400-FZR-40 ... _505wt_986
these are for the 3tj and are cheap considering they are a direct replacement and are brand new , the only thing is there is no exup valve
hopefully this will help
alex
http://www.ebay.co.uk/itm/FZR400-FZR-40 ... _505wt_986
these are for the 3tj and are cheap considering they are a direct replacement and are brand new , the only thing is there is no exup valve
hopefully this will help
alex
-
Fzr400Welch
- Settled in member
- Posts: 29
- Joined: Fri Aug 31, 2012 9:06 am
Re: FZR400 down pipes?
I have a 3EN2 model so these wouldn't fit would they.alexday93 wrote:hey i had the same problem with my 3tj
http://www.ebay.co.uk/itm/FZR400-FZR-40 ... _505wt_986
these are for the 3tj and are cheap considering they are a direct replacement and are brand new , the only thing is there is no exup valve
hopefully this will help
alex
Its hard to find some, i put some hole filler in the wholes to stop the blowing.
-
thunderace
- Site Supporter
- Posts: 1584
- Joined: Fri Sep 10, 2010 9:03 pm
- Bike owned: R6, YZF600R
- Location: Blackburn, Lancs.
Re: FZR400 down pipes?
3EN1 and 3EN2 headers are the same and you can get aftermarket ones from Sandy Bike Spares 
Conventional wisdom says to know your limits. To know your limits you need to find them first. Finding your limits generally involves getting in over your head and hoping you live long enough to benefit from the experience. That's the fun part.
-
Hogdigerdy Dog
- Site Supporter
- Posts: 545
- Joined: Mon Sep 14, 2009 6:34 pm
- Bike owned: FZR400RR 3TJ, ZX9R fighter
- Location: Dorsetshire
Re: FZR400 down pipes?
i could be totally wrong, someone correct me if i am (i'm sure there was a thread on here somewhere)
BUT i haven't heard many good revues about these pipes,
apparently the brackets that attach to the head, distort something wicked (end up looking like bananas) and after not too long split
BUT i haven't heard many good revues about these pipes,
apparently the brackets that attach to the head, distort something wicked (end up looking like bananas) and after not too long split