micron exhaust
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
1308lee
- Settled in member
- Posts: 63
- Joined: Mon Aug 13, 2012 8:47 pm
- Bike owned: CBR 125 Followed by my NC29
- Location: Bury, Manchester
micron exhaust
found a cheap one in good condition but iv been told its TOO LOUD!?
anyone have any opinions?
anyone have any opinions?
-
The Novice
- Site Supporter
- Posts: 422
- Joined: Thu Jul 15, 2010 12:59 pm
- Bike owned: NC23 NC30 CRM250
- Location: West Midlands
Re: micron exhaust
db killer? ebay......
-
laminator
- NWAA Supporter
- Posts: 220
- Joined: Wed Jan 26, 2011 7:51 pm
- Bike owned: 2tk,NC30, YB7
- Location: Midlands
Re: micron exhaust
Too loud for what? :)1308lee wrote:found a cheap one in good condition but iv been told its TOO LOUD!?
anyone have any opinions?
My micron pipe is very loud. I did try repacking it last week but it didn't really make any difference.
-
amorti
- Regular Member
- Posts: 957
- Joined: Sun May 18, 2008 4:51 pm
- Bike owned: CB-1, MSX125
- Location: Gibraltar
Re: micron exhaust
Older Micron cans are 100mm diameter. Most sports cans are 110mm in diameter. This makes a real difference. Even with a dB killer it'll be louder than you're really wanting. dB killers help but aren't perfect. That said the one on my Blade makes an immense difference.
Similar design to this:
http://www.ebay.co.uk/itm/Baffle-DB-Kil ... 2570616cd5
Some are better than others as dB killers go. For example these are toss for effectiveness:
http://www.ebay.co.uk/itm/EXHAUST-BAFFL ... 2574dee8a6
and the weld holding the bracket on on mine failed as well.
Similar design to this:
http://www.ebay.co.uk/itm/Baffle-DB-Kil ... 2570616cd5
Some are better than others as dB killers go. For example these are toss for effectiveness:
http://www.ebay.co.uk/itm/EXHAUST-BAFFL ... 2574dee8a6
and the weld holding the bracket on on mine failed as well.
-
davlr
- Settled in member
- Posts: 51
- Joined: Mon Jan 17, 2011 3:03 pm
- Bike owned: NC30 35 23 APRILIA RS!
Re: micron exhaust
I have the baffle same as the first link. Little or no difference to the sound, but is handy for the police when they say its too loud. "But I have a baffle in" "ok off you go"
-
1308lee
- Settled in member
- Posts: 63
- Joined: Mon Aug 13, 2012 8:47 pm
- Bike owned: CBR 125 Followed by my NC29
- Location: Bury, Manchester
Re: micron exhaust
i didnt mean too loud for me 
louder the better as far as im concerned haha! but the seller claimed it was too loud :')
having a closer look at it, it looks very similar to the standard can but its scuffed up to death
Looking at a micron off a 900 fireblade 3 bolt fitting, i think the measurements are 78mm between the holes, will it fit? it came off a 97 if thats any help?
louder the better as far as im concerned haha! but the seller claimed it was too loud :')
having a closer look at it, it looks very similar to the standard can but its scuffed up to death
Looking at a micron off a 900 fireblade 3 bolt fitting, i think the measurements are 78mm between the holes, will it fit? it came off a 97 if thats any help?