Carbon question.......

Post by **Drunkn Munky** » Thu Jul 12, 2012 11:16 pm

I so want some NC frame and swinger covers in kevlar

morepower · Post by **morepower** » Thu Jul 12, 2012 11:19 pm

Drunkn Munky wrote: I so want some NC frame and swinger covers in kevlar

Still sorting those out..... the pattern maker was supposed to be doing the moulds.... I will chase him up again...

Post by **Evilchicken0** » Fri Jul 13, 2012 9:28 am

The 3TJ really needs a hugger, although I'd think the R1's going to be to wide - could it be adapted ???

morepower · Post by **morepower** » Fri Jul 13, 2012 1:14 pm

Evilchicken0 wrote:The 3TJ really needs a hugger, although I'd think the R1's going to be to wide - could it be adapted ???

Well..... it is a bit wide but it could be altered and another mould made...... it would be nice to try so I am making one for Levo to try..... That one was sold and had to go out yesterday... But making another in glass to hack up is easy...

Post by **Evilchicken0** » Fri Jul 13, 2012 2:10 pm

Ok - make me a hack upable one then

morepower · Post by **morepower** » Fri Jul 13, 2012 5:08 pm

Evilchicken0 wrote:Ok - make me a hack upable one then

No problem... it will be glass and have the flanges on to let you cut a bit from the middle then you can put a flat bit of glass along thr flange to help re-join it again so it can be bonded and filled to make a new mould without having to spend 3 days putting flanges back on.... Is that OK??

Post by **Evilchicken0** » Fri Jul 13, 2012 5:17 pm

Sounds good to me.

morepower · Post by **morepower** » Tue Jul 17, 2012 12:50 pm

OK had to fit this in between other jobs.... But here is the first carbon Right hand frame protector... I made this just using some scrap carbon to see how it would turn out.. What do you think?

Here is the left one in Carbon Kevlar. (Levo wanted this specifically...)

I have done some swing arm protectors but was not 100% happy with the moulds so I have a master made to make a new mould this week I hope... I just have to fit it in between a couple of other things....

hannakournikova · Post by **hannakournikova** » Tue Jul 17, 2012 2:47 pm

Very nice! i have a busted nc30 frame. Will happily send you the frame spar if you need some for templates

morepower · Post by **morepower** » Tue Jul 17, 2012 2:59 pm

hannakournikova wrote:Very nice! i have a busted nc30 frame. Will happily send you the frame spar if you need some for templates

Let me try my mate one more time... he has a frame sitting doing nothing.....
If he doesnt get his act together... then great stuff.... Thanks....

Carbon question.......

Re: Carbon question.......

Re: Carbon question.......

Re: Carbon question.......

Re: Carbon question.......

Re: Carbon question.......

Re: Carbon question.......

Re: Carbon question.......

Re: Carbon question.......

Re: Carbon question.......

Re: Carbon question.......