nc35 head gaskets
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
peavey
- Settled in member
- Posts: 50
- Joined: Wed Oct 22, 2008 9:36 pm
nc35 head gaskets
Is it necessary to put a sealer on the gaskets when reassembling the heads on the engine or are the gaskets themselves sufficient for sealing 
-
hunter
- Site Supporter
- Posts: 1292
- Joined: Thu Nov 20, 2008 1:09 pm
Re: nc35 head gaskets
I take it you are using new gaskets,If not you should,
So the answer to your question is no,gaskets are used clean.
So the answer to your question is no,gaskets are used clean.
-
peavey
- Settled in member
- Posts: 50
- Joined: Wed Oct 22, 2008 9:36 pm
Re: nc35 head gaskets
yeah sorry I should have stated they are new ones!
thanks for that
thanks for that
-
hunter
- Site Supporter
- Posts: 1292
- Joined: Thu Nov 20, 2008 1:09 pm
Re: nc35 head gaskets
Just fit them then.
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: nc35 head gaskets
As above, fit them as they come.
Make sure the mating sufaces are clean and torque the bolts to the correct torque and sequence from the service manual.
Make sure the mating sufaces are clean and torque the bolts to the correct torque and sequence from the service manual.
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
peavey
- Settled in member
- Posts: 50
- Joined: Wed Oct 22, 2008 9:36 pm
Re: nc35 head gaskets
all sorted lads thanks , should have it up and running shortly.