cbr600rr brake conversion
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
ridders
- Settled in member
- Posts: 8
- Joined: Sun Jan 08, 2012 7:41 pm
cbr600rr brake conversion
hey.
I am thinking about doing the CBR600RR front brake conversion on my nc30, but I am not really sure how much work or money is needed for this. I would appreciate it if anybody could tell me basically which new parts are needed for this and a estimated cost. I know there have been other posts similar to this but they seem to have a general grasp on what work is required already so not much has been coverd other than the fact it requires 2003/4 model discs.
cheers.
I am thinking about doing the CBR600RR front brake conversion on my nc30, but I am not really sure how much work or money is needed for this. I would appreciate it if anybody could tell me basically which new parts are needed for this and a estimated cost. I know there have been other posts similar to this but they seem to have a general grasp on what work is required already so not much has been coverd other than the fact it requires 2003/4 model discs.
cheers.
-
CMSMJ1
- Moderators
- Posts: 7161
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Re: cbr600rr brake conversion
Welcome.
It does ont need any different discs....
you need, for an NC30 - some brackets for the forks. Some calipers, some new brake lines and an appropriate master cylinder - 5/8 instead of the 14mm taht is std on NC30
Loads of calipers fit - I have cbr600FX on mine - black ones.
Have a browse for some more threads.
£100 all in should see you get sorted if you get some good deals
It does ont need any different discs....
you need, for an NC30 - some brackets for the forks. Some calipers, some new brake lines and an appropriate master cylinder - 5/8 instead of the 14mm taht is std on NC30
Loads of calipers fit - I have cbr600FX on mine - black ones.
Have a browse for some more threads.
£100 all in should see you get sorted if you get some good deals
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
The V4 is the law..
NC30 - No9 - my old mate
-
ridders
- Settled in member
- Posts: 8
- Joined: Sun Jan 08, 2012 7:41 pm
Re: cbr600rr brake conversion
ok thanks for the extra info. So if I got the calliper brakets from Rick Oliver I would just have to source new callipers, hoses and master cylinder. Ebay the best place for these would you think or?
cheers
cheers