Does anyone know what rearsets fit the NC30 without any mods?
Cheers
Kris
Rearsets that fit an NC30
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
ibby4585
- Site Supporter
- Posts: 2315
- Joined: Tue Jun 16, 2009 1:42 pm
- Bike owned: SP's
- Location: oxfordshire
-
viper_biker
- Moderators
- Posts: 1798
- Joined: Sun Apr 06, 2008 11:25 am
- Bike owned: VFR400RR, CBR1000RR6
- Location: Belfast, Norn Iron
- Contact:
Re: Rearsets that fit an NC30
Looking to know the same. I've a 2nd set of Gilles left over from the 'Blade and would like some plates that'll bolt on to the frame and I can use these spares. Mounting hole is 72mm so another bike with the same gap will do, you'll just need spacers to move it away from the swinger.
Ducati 916, not worth a carrott
-
ibby4585
- Site Supporter
- Posts: 2315
- Joined: Tue Jun 16, 2009 1:42 pm
- Bike owned: SP's
- Location: oxfordshire
Re: Rearsets that fit an NC30
Doodleface put this up but I don't know how accurate it is. I'm surprises more people haven't tried different rearsets considering decent Japanese nc30 ones are non existent now.
viewtopic.php?f=24&t=35563
viewtopic.php?f=24&t=35563
-
Drunkn Munky
- Site Supporter
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: Rearsets that fit an NC30
Whatever you try keep a eye on the peg position, i had some harris rearsets from a 2001 CBR600 FS that fitted but the peg was miles too low and felt terrible.
-
ibby4585
- Site Supporter
- Posts: 2315
- Joined: Tue Jun 16, 2009 1:42 pm
- Bike owned: SP's
- Location: oxfordshire
Re: Rearsets that fit an NC30
Yeah looked at a set of Harris ones on eBay for a CBR blade but the owner wouldn't even measure the distance from the centres for me.
-
viper_biker
- Moderators
- Posts: 1798
- Joined: Sun Apr 06, 2008 11:25 am
- Bike owned: VFR400RR, CBR1000RR6
- Location: Belfast, Norn Iron
- Contact:
Re: Rearsets that fit an NC30
04-07 Blade ones don't fit, I know that for a fact.
Ducati 916, not worth a carrott
-
ibby4585
- Site Supporter
- Posts: 2315
- Joined: Tue Jun 16, 2009 1:42 pm
- Bike owned: SP's
- Location: oxfordshire
Re: Rearsets that fit an NC30
Anyone know if Nsr mc28 rearsets fit an NC30? look pretty close in the pics.
-
doodleface
- Settled in member
- Posts: 115
- Joined: Sun Feb 19, 2012 12:10 pm
- Bike owned: RVF400
- Contact:
Re: Rearsets that fit an NC30
Yeah don't buy anything till i confirm ok.
I'm happy to guinea pig this shit.
I'm happy to guinea pig this shit.
-
doodleface
- Settled in member
- Posts: 115
- Joined: Sun Feb 19, 2012 12:10 pm
- Bike owned: RVF400
- Contact:
Re: Rearsets that fit an NC30
Here ya go:
Until I find something perfect, these and your own adapterplats might be the go. Fucking easy to make your own
Cheap too!
http://www.ebay.com.au/itm/CUSTOM-BIKE- ... 2591wt_985
Until I find something perfect, these and your own adapterplats might be the go. Fucking easy to make your own
Cheap too!http://www.ebay.com.au/itm/CUSTOM-BIKE- ... 2591wt_985
-
doodleface
- Settled in member
- Posts: 115
- Joined: Sun Feb 19, 2012 12:10 pm
- Bike owned: RVF400
- Contact:
Re: Rearsets that fit an NC30
Sadly the gixxer plates wont fit, the older watercooled ones would but they don't have those in stock, i've contacted some manufactures to get some adapter plates made for the rearsets above. I actually have these on my racebike and they are brilliant, so I might make my own adapter plates and sell them for 20 to 40 bucks a pair, meaning as set of these plus my plates will cost you 100 bucks ish. If i do do it, i'll do it for the love of doing it ONLY, otherwise i'll send the plate plans to rick and get him to make em or something. He seems good at making shit.