Shock fitting with pics
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
ibby4585
- Site Supporter
- Posts: 2315
- Joined: Tue Jun 16, 2009 1:42 pm
- Bike owned: SP's
- Location: oxfordshire
Re: Shock fitting with pics
lizard821000 wrote:i see, didnt look closely, just use some washer/shims to space it out.
No it needs to be done properly mate.
Give them a ring and confirm the measurement of the bottom bracket. Then get it sent back if yours is wrong Nitron are a good company so there shouldn't be any problems.
Kris
-
lizard821000
- Site Supporter
- Posts: 903
- Joined: Thu Feb 03, 2011 5:33 pm
- Bike owned: nsr ,cagiva mito , vfr 400 R3L
- Location: portsmouth
Re: Shock fitting with pics
was only a quick pikey fix...... if youv just bough the thing then deffo do as ibby says. should be a nice fit if new.
iv made much worse fit before.
iv made much worse fit before.
-
MickCheese
- Settled in member
- Posts: 13
- Joined: Wed Apr 30, 2008 6:11 pm
- Bike owned: ZXR400, 954 Blade, NC30
- Location: Buckinghamshire
Re: Shock fitting with pics
Don't do that until you have telephoned Nitron on Wednesday and asked them if it's right.lizard821000 wrote:i see, didnt look closely, just use some washer/shims to space it out.
Mick