NC30 float valve o-ring size

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
krisztian_andre
Familiar Member
Posts: 484
Joined: Fri Oct 02, 2009 6:49 pm
Bike owned: MG v35 II, NC30, MG NF Mil.
Location: Germany
NC30 float valve o-ring size

Post by krisztian_andre »

I'm shopping for fuel-resistant o-rings for my carbs. What is the size of the o-ring that goes in the float valve set (16011-mr8-003) between the valve seat and the filter?
Top
krisztian_andre
Familiar Member
Posts: 484
Joined: Fri Oct 02, 2009 6:49 pm
Bike owned: MG v35 II, NC30, MG NF Mil.
Location: Germany
Re: NC30 float valve o-ring size

Post by krisztian_andre »

I was thinking Viton for material.
If someone has a valve set assembly out of the bike can you please measure the internal diameter of the 0-ring and the cross section.
Last edited by krisztian_andre on Sat Jun 02, 2012 5:46 pm, edited 1 time in total.
Top
krisztian_andre
Familiar Member
Posts: 484
Joined: Fri Oct 02, 2009 6:49 pm
Bike owned: MG v35 II, NC30, MG NF Mil.
Location: Germany
Re: NC30 float valve o-ring size

Post by krisztian_andre »

http://www.mcmaster.com/#o-rings/=hsuzmy
Top
Post Reply

Return to “Honda - Workshop”