NC30 Damper rod bolts.
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
gpz900
- Settled in member
- Posts: 34
- Joined: Tue May 17, 2011 2:59 am
- Bike owned: GPZ900, NC30, NC35, NSR250SE
- Location: Sydney, Australia
NC30 Damper rod bolts.
Hi everyone,
Had to drill out the damper rod bolts on my NC30 and just wondered where the best place to get replacements is?
Is it advisable to get originals or will any bolts the correct size do the trick?
If so, does anyone know the correct dimensions?
Cheers....
Al.
Had to drill out the damper rod bolts on my NC30 and just wondered where the best place to get replacements is?
Is it advisable to get originals or will any bolts the correct size do the trick?
If so, does anyone know the correct dimensions?
Cheers....
Al.
-
RickOliver
- Site Supporter
- Posts: 492
- Joined: Sun May 11, 2008 8:55 am
Re: NC30 Damper rod bolts.
Hi, Al -
They are Honda specials with a lower profile head than a standard allen screw - I can supply them if you want, drop me a mail...
Rick
They are Honda specials with a lower profile head than a standard allen screw - I can supply them if you want, drop me a mail...
Rick
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: NC30 Damper rod bolts.
You can order them in at your local honda dealer mate, they're a common part between several models.
"It's just a ride" Bill Hicks
-
Vfr400/tbird
- Settled in member
- Posts: 92
- Joined: Sun Mar 27, 2011 7:19 pm
- Bike owned: VFR400 NC21 Thunderbird 900
- Location: West huntspill Somerset
Re: NC30 Damper rod bolts.
If you need any part numbers for vfr's then try CMSNL as they have full micro fiche's, i just had to get a damper rod bolt for my nc21 their probaly the same part however best to check, i went on CMSNL and looked up the part number and then went to ling's honda website, punched in the part number and orderd one they are about 3 quid but the postage is 4.50 so thats a lot for a bolt but its a very crucial bolt 
Just dont forget to fit a new copper washer when installing the bolt as it helps prevent the fork ol leaking!
Just dont forget to fit a new copper washer when installing the bolt as it helps prevent the fork ol leaking!