NC35 needles vs NC30 needles
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
brys
- Settled in member
- Posts: 54
- Joined: Thu Jun 05, 2008 2:28 pm
- Bike owned: NC35 and track NC30
- Location: South of france, and Fareham Hampshire.
NC35 needles vs NC30 needles
Hi guys,
Just wondering if there are any differences between the NC30 and NC35 standard carb needles? Need some standard ones in my NC30 and just want to check this out before I rip the ones out of my '35.
Cheers,
Ryan.
Just wondering if there are any differences between the NC30 and NC35 standard carb needles? Need some standard ones in my NC30 and just want to check this out before I rip the ones out of my '35.
Cheers,
Ryan.
-
viper_biker
- Moderators
- Posts: 1798
- Joined: Sun Apr 06, 2008 11:25 am
- Bike owned: VFR400RR, CBR1000RR6
- Location: Belfast, Norn Iron
- Contact:
Re: NC35 needles vs NC30 needles
If somone can measure an NC35 needle, I'll measure an NC30 needle and see if there are any differences.
Ducati 916, not worth a carrott
-
brys
- Settled in member
- Posts: 54
- Joined: Thu Jun 05, 2008 2:28 pm
- Bike owned: NC35 and track NC30
- Location: South of france, and Fareham Hampshire.
Re: NC35 needles vs NC30 needles
sounds great!
-
porndoguk
- Site Supporter
- Posts: 3293
- Joined: Wed Jun 16, 2010 11:17 pm
- Bike owned: NC30
- Location: Middle England
- Contact:
Re: NC35 needles vs NC30 needles
Im sure there was a chart someone did with measurements, rick o also did some, and some on akharas site (mike normans) i have measurements too but fuck knows where.
Rick
Rick
NC30 & NC23 33BHP Restrictors For Sale
£25 Inc P&P and donation to 400GB PM for more details
http://www.bikerstraining.com
Like us on Facebook for more information - First Bike on Scene - Emergency Response Skills - UK
£25 Inc P&P and donation to 400GB PM for more details
http://www.bikerstraining.com
Like us on Facebook for more information - First Bike on Scene - Emergency Response Skills - UK
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: NC35 needles vs NC30 needles
They're certain to be different, I'm not sure by how much though.
I can measure an nc35 needle after work tonight if it's any help.
I can measure an nc35 needle after work tonight if it's any help.
"It's just a ride" Bill Hicks
-
brys
- Settled in member
- Posts: 54
- Joined: Thu Jun 05, 2008 2:28 pm
- Bike owned: NC35 and track NC30
- Location: South of france, and Fareham Hampshire.
Re: NC35 needles vs NC30 needles
Found what I was looking for on Akharas site. It is a gold mine of info!
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: NC35 needles vs NC30 needles
The standard rvf needle (J8VA only) is approximately 39mm long, measured from under the under the head to the needle tip as per akhara's
Can get accurate measurements when I find my verniers...
Can get accurate measurements when I find my verniers...
"It's just a ride" Bill Hicks
-
brys
- Settled in member
- Posts: 54
- Joined: Thu Jun 05, 2008 2:28 pm
- Bike owned: NC35 and track NC30
- Location: South of france, and Fareham Hampshire.
Re: NC35 needles vs NC30 needles
Cheers for the advice guys. Ive got some standard needles now. their about 2 mm longer than my HRC ones!