So what are these parts?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Posts: 31
- Joined: Mon May 31, 2010 6:52 pm
So what are these parts?
Hi All
Can anyone give me any heads up on where these parts fit on the bike? Would be eternally grateful!



Can anyone give me any heads up on where these parts fit on the bike? Would be eternally grateful!



- ibby4585
- Site Supporter
- Posts: 2315
- Joined: Tue Jun 16, 2009 1:42 pm
- Bike owned: SP's
- Location: oxfordshire
Re: So what are these parts?
Could be wrong but without checking.
1. Is a bracket that fits on the horn/bottom yoke to keep the front hoses together.
2. Can't quite make out
3. Is another bracket that fits right side right at the bottom of the frame for a breather.
1. Is a bracket that fits on the horn/bottom yoke to keep the front hoses together.
2. Can't quite make out
3. Is another bracket that fits right side right at the bottom of the frame for a breather.
- ibby4585
- Site Supporter
- Posts: 2315
- Joined: Tue Jun 16, 2009 1:42 pm
- Bike owned: SP's
- Location: oxfordshire
Re: So what are these parts?
Ahh 2nd one might be a a choke cable bracket that fits on the rear left carb slide cover.
Last edited by ibby4585 on Mon May 21, 2012 10:34 pm, edited 1 time in total.
- iDemonix
- Site Supporter
- Posts: 651
- Joined: Tue Aug 24, 2010 10:26 pm
- Bike owned: '92 NC30
- Location: Banbury, Oxfordshire
Re: So what are these parts?
Is the 2nd one one of the pieces that you put a bolt through it, then in to your engine casing, then you put a pipe next to it and bend that clip round it, so it holds the pipe around the engine casing? I might be talking bollocks, they're on the RH side of the engine iirc.
I have the 1st one sat in a draw, not fitted. Every time I see it I have to laugh as it looks like a pair of balls.
I have the 1st one sat in a draw, not fitted. Every time I see it I have to laugh as it looks like a pair of balls.
A roaring V4 is the summer soundtrack.
-
- Site Supporter
- Posts: 243
- Joined: Mon Sep 29, 2008 1:34 pm
- Bike owned: 1990 NC30
- Location: Kingston-Upon-Thames
Re: So what are these parts?
I think the second one secures part of the headlight sub-loom and bolts to the back of the clocks. Is the third one for removing boy scouts from girl guides?
Neosophist wrote:An object that cannot move by itself cannot "fuck itself up", as you put it.