Yamamoto half system outlet OD?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
tomski
Settled in member
Posts: 71
Joined: Sat May 03, 2008 6:15 pm
Yamamoto half system outlet OD?

Post by tomski »

Doe anybody know the outside diameter of the outlet of a yamamoto half system off hand?

My system has yet to arrive, and I plan to go to an auto jumble tomorrow, and don't want to miss the opportunity of finding a suitable end can for it. You never know?!
Top
Neosophist
Moderators
Moderators
Posts: 8172
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954
Re: Yamamoto half system outlet OD?

Post by Neosophist »

51/52mm　maybe.. it's a bit late to go measure mine.. maybe somebody else will know for sure.. it's quite small
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
Top
tomski
Settled in member
Posts: 71
Joined: Sat May 03, 2008 6:15 pm
Re: Yamamoto half system outlet OD?

Post by tomski »

Cheers Neo, decent gauge to kick off with.
Top
User avatar
Cammo
Site Supporter
Site Supporter
Posts: 4505
Joined: Thu May 01, 2008 12:35 am
Bike owned: NC30
Location: Melbourne, Australia
Re: Yamamoto half system outlet OD?

Post by Cammo »

Just measured one I have lying around, 50mm exactly.
"It's just a ride" Bill Hicks
Top
tomski
Settled in member
Posts: 71
Joined: Sat May 03, 2008 6:15 pm
Re: Yamamoto half system outlet OD?

Post by tomski »

Cheers Cammo,

I went round the jumble on Saturday after having a brief check to find your reply... Had high hopes, feeling optimistic.... But no dice.
On the plus side, my system arrived over the weekend.
Top
Post Reply

Return to “Honda - Workshop”